VPBREG Struct Reference

The DSP program "registry" info for each board. More...

#include <vpbreg.h>

Collaboration diagram for VPBREG:

List of all members.

Public Types
typedef std::vector< VPBREG >	List
	Container type for all registered boards.
Public Attributes
int	chan
	listening port number
int	board
	listening board number
DSP data
Data in this block is stored in the same format on the DSP
uint16_t	data
	data reg for PC-DSP comms
uint16_t	numch
	number of channels
uint16_t	chstat [MAXCH]
	status of each channel
uint16_t	a_dnmess
	addr of "down" message FIFO in DSP
uint16_t	a_upmess
	addr of "up" message FIFO in DSP
uint16_t	szmess
	size in words of message FIFOs
uint16_t	a_rxdf [MAXCH]
	addresses of RX FIFOs in DSP
uint16_t	a_txdf [MAXCH]
	addresses of TX FIFOs in DSP
uint16_t	szrxdf [MAXCH]
	size of RX FIFOs in DSP
uint16_t	sztxdf [MAXCH]
	size of TX FIFOs in DSP
uint16_t	lsf
	length of superframe in words
PC specific info
uint16_t	base
	base address of VPB
Fifo *	dnmess
	ptr to down message DSP FIFO in PC
Fifo *	upmess
	ptr to down message DSP FIFO in PC
Fifo *	rxdf [MAXCH]
	ptrs to RX DSP FIFO info in PC
Fifo *	txdf [MAXCH]
	ptrs to TX DSP FIFO info in PC
VPB_MODEL	model
	VPB model.
uint16_t	ddmodel
	VPB Device Driver model.
float	defRecordGain
	default record (Tx) gain
float	defPlayGain
	default play (Rx) gain
float	defSRecordGain
	default record (Tx) gain for station
float	defSPlayGain
	default play (Rx) gain for station
uint16_t	defbal1
	default codec balance register 1
uint16_t	defbal2
	default codec balance register 2
uint16_t	defbal3
	default codec balance register 3
uint16_t	defSbal1
	default codec balance register 1 for station
uint16_t	defSbal2
	default codec balance register 2 for station
uint16_t	defSbal3
	default codec balance register 3 for station
char	mdate [12]
	Manufacture Date.
char	revision [8]
	Revision number.
char	serial_n [10]
	Serial Number.
float	defRecordGainDown
	record gain down control for better DTMF
std::vector< int >	handles
	lookup table of the handles for each port.
int	cardnum
	The number of the card as opened by the driver.
int	cardtypnum
	The number of the card of this type.
Country::List	country
	Pointers to country specific data for each port.
ToneGen::List	toneg
	Pointers to ToneGen instances for each port.
struct {
int   chan
	listening port number
int   board
	listening board number
}	listen_info [MAXCH]
	Used to keep a track of the listens.
struct TD **	toned
	Pointer to Tone detector state variables.
void *	chans
	Pointer to Channel state variables.
HostDSP *	hostdsp
	Pointer to the Host DSP object.
void *	cardinfo
	Pointer to Conf Info section for this card.
bool	useconf
	Flag true if a config file was read.

---

Detailed Description

The DSP program "registry" info for each board.