Configuration options

This section provides a list of the configuration options that can be set in the sahara configuration file.

DEFAULT

host
Type:host address
Default:0.0.0.0

Hostname or IP address that will be used to listen on.

port
Type:port number
Default:8386
Minimum Value:0
Maximum Value:65535

Port that will be used to listen on.

log_exchange
Type:boolean
Default:false

Log request/response exchange details: environ, headers and bodies.

job_binary_max_KB
Type:integer
Default:5120

Maximum length of job binary data in kilobytes that may be stored or retrieved in a single operation.

job_canceling_timeout
Type:integer
Default:300

Timeout for canceling job execution (in seconds). Sahara will try to cancel job execution during this time.

edp_internal_db_enabled
Type:boolean
Default:true

Use Sahara internal db to store job binaries.

use_floating_ips
Type:boolean
Default:true

If set to True, Sahara will use floating IPs to communicate with instances. To make sure that all instances have floating IPs assigned in Nova Network set “auto_assign_floating_ip=True” in nova.conf. If Neutron is used for networking, make sure that all Node Groups have “floating_ip_pool” parameter defined.

node_domain
Type:string
Default:novalocal

The suffix of the node’s FQDN. In nova-network that is the dhcp_domain config parameter.

use_neutron
Type:boolean
Default:true

Use Neutron Networking (False indicates the use of Nova networking).

use_namespaces
Type:boolean
Default:false

Use network namespaces for communication (only valid to use in conjunction with use_neutron=True).

use_rootwrap
Type:boolean
Default:false

Use rootwrap facility to allow non-root users to run the sahara services and access private network IPs (only valid to use in conjunction with use_namespaces=True)

rootwrap_command
Type:string
Default:sudo sahara-rootwrap /etc/sahara/rootwrap.conf

Rootwrap command to leverage. Use in conjunction with use_rootwrap=True

use_designate
Type:boolean
Default:false

Use Designate for internal and external hostnames resolution

nameservers
Type:list
Default:

IP addresses of Designate nameservers. This is required if ‘use_designate’ is True

db_driver
Type:string
Default:sahara.db

Driver to use for database access.

plugins
Type:list
Default:vanilla,spark,cdh,ambari,storm,mapr

List of plugins to be loaded. Sahara preserves the order of the list when returning it.

enable_data_locality
Type:boolean
Default:false

Enables data locality for hadoop cluster. Also enables data locality for Swift used by hadoop. If enabled, ‘compute_topology’ and ‘swift_topology’ configuration parameters should point to OpenStack and Swift topology correspondingly.

enable_hypervisor_awareness
Type:boolean
Default:true

Enables four-level topology for data locality. Works only if corresponding plugin supports such mode.

compute_topology_file
Type:string
Default:etc/sahara/compute.topology

File with nova compute topology. It should contain mapping between nova computes and racks.

swift_topology_file
Type:string
Default:etc/sahara/swift.topology

File with Swift topology.It should contain mapping between Swift nodes and racks.

use_identity_api_v3
Type:boolean
Default:true

Enables Sahara to use Keystone API v3. If that flag is disabled, per-job clusters will not be terminated automatically.

global_remote_threshold
Type:integer
Default:100

Maximum number of remote operations that will be running at the same time. Note that each remote operation requires its own process to run.

cluster_remote_threshold
Type:integer
Default:70

The same as global_remote_threshold, but for a single cluster.

proxy_command
Type:string
Default:

Proxy command used to connect to instances. If set, this command should open a netcat socket, that Sahara will use for SSH and HTTP connections. Use {host} and {port} to describe the destination. Other available keywords: {tenant_id}, {network_id}, {router_id}.

proxy_command_use_internal_ip
Type:boolean
Default:false

Force proxy_command usage to be consuming internal IP always, instead of management IP. Ignored if proxy_command is not set.

os_region_name
Type:string
Default:<None>

Region name used to get services endpoints.

remote
Type:string
Default:ssh

A method for Sahara to execute commands on VMs.

api_workers
Type:integer
Default:1

Number of workers for Sahara API service (0 means all-in-one-thread configuration).

job_workflow_postfix
Type:string
Default:

Postfix for storing jobs in hdfs. Will be added to ‘/user/<hdfs user>/’ path.

periodic_enable
Type:boolean
Default:true

Enable periodic tasks.

periodic_fuzzy_delay
Type:integer
Default:60

Range in seconds to randomly delay when starting the periodic task scheduler to reduce stampeding. (Disable by setting to 0).

periodic_interval_max
Type:integer
Default:60

Max interval size between periodic tasks execution in seconds.

min_transient_cluster_active_time
Type:integer
Default:30

Minimal “lifetime” in seconds for a transient cluster. Cluster is guaranteed to be “alive” within this time period.

cleanup_time_for_incomplete_clusters
Type:integer
Default:0

Maximal time (in hours) for clusters allowed to be in states other than “Active”, “Deleting” or “Error”. If a cluster is not in “Active”, “Deleting” or “Error” state and last update of it was longer than “cleanup_time_for_incomplete_clusters” hours ago then it will be deleted automatically. (0 value means that automatic clean up is disabled).

periodic_coordinator_backend_url
Type:string
Default:<None>

The backend URL to use for distributed periodic tasks coordination.

periodic_workers_number
Type:integer
Default:1

Number of threads to run periodic tasks.

coordinator_heartbeat_interval
Type:integer
Default:1

Interval size between heartbeat execution in seconds. Heartbeats are executed to make sure that connection to the coordination server is active.

hash_ring_replicas_count
Type:integer
Default:40

Number of points that belongs to each member on a hash ring. The larger number leads to a better distribution.

use_domain_for_proxy_users
Type:boolean
Default:false

Enables Sahara to use a domain for creating temporary proxy users to access Swift. If this is enabled a domain must be created for Sahara to use.

proxy_user_domain_name
Type:string
Default:<None>

The domain Sahara will use to create new proxy users for Swift object access.

proxy_user_role_names
Type:list
Default:Member

A list of the role names that the proxy user should assume through trust for Swift object access.

disable_event_log
Type:boolean
Default:false

Disables event log feature.

retries_number
Type:integer
Default:5

Number of times to retry the request to client before failing

retry_after
Type:integer
Default:10

Time between the retries to client (in seconds).

heat_stack_tags
Type:list
Default:data-processing-cluster

List of tags to be used during operating with stack.

heat_enable_wait_condition
Type:boolean
Default:true

Enable wait condition feature to reduce polling during cluster creation

ssh_timeout_common
Type:integer
Default:300
Minimum Value:1

Overrides timeout for common ssh operations, in seconds

ssh_timeout_interactive
Type:integer
Default:1800
Minimum Value:1

Overrides timeout for interactive ssh operations, in seconds

ssh_timeout_files
Type:integer
Default:120
Minimum Value:1

Overrides timeout for ssh operations with files, in seconds

use_barbican_key_manager
Type:boolean
Default:false

Enable the usage of the OpenStack Key Management service provided by barbican.

data_source_types
Type:list
Default:swift,hdfs,maprfs,manila

List of data sources types to be loaded. Sahara preserves the order of the list when returning it.

job_binary_types
Type:list
Default:swift,manila,internal-db

List of job binary types to be loaded. Sahara preserves the order of the list when returning it.

api_paste_config
Type:string
Default:api-paste.ini

File name for the paste.deploy config for api service

wsgi_log_format
Type:string
Default:%(client_ip)s "%(request_line)s" status: %(status_code)s  len: %(body_length)s time: %(wall_seconds).7f

A python format string that is used as the template to generate log lines. The following values can beformatted into it: client_ip, date_time, request_line, status_code, body_length, wall_seconds.

tcp_keepidle
Type:integer
Default:600

Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not supported on OS X.

wsgi_default_pool_size
Type:integer
Default:100

Size of the pool of greenthreads used by wsgi

max_header_line
Type:integer
Default:16384

Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those generated when keystone is configured to use PKI tokens with big service catalogs).

wsgi_keep_alive
Type:boolean
Default:true

If False, closes the client socket connection explicitly.

client_socket_timeout
Type:integer
Default:900

Timeout for client connections’ socket operations. If an incoming connection is idle for this number of seconds it will be closed. A value of ‘0’ means wait forever.

run_external_periodic_tasks
Type:boolean
Default:true

Some periodic tasks can be run in a separate process. Should we run them here?

rpc_conn_pool_size
Type:integer
Default:30

Size of RPC connection pool.

Deprecated Variations
Group Name
DEFAULT rpc_conn_pool_size
conn_pool_min_size
Type:integer
Default:2

The pool size limit for connections expiration policy

conn_pool_ttl
Type:integer
Default:1200

The time-to-live in sec of idle connections in the pool

rpc_zmq_bind_address
Type:string
Default:*

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The “host” option should point or resolve to this address.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_bind_address
rpc_zmq_matchmaker
Type:string
Default:redis
Valid Values:redis, sentinel, dummy

MatchMaker driver.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_matchmaker
rpc_zmq_contexts
Type:integer
Default:1

Number of ZeroMQ contexts, defaults to 1.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_contexts
rpc_zmq_topic_backlog
Type:integer
Default:<None>

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_topic_backlog
rpc_zmq_ipc_dir
Type:string
Default:/var/run/openstack

Directory for holding IPC sockets.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_ipc_dir
rpc_zmq_host
Type:string
Default:localhost

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match “host” option, if running Nova.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_host
zmq_linger
Type:integer
Default:-1

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

Deprecated Variations
Group Name
DEFAULT rpc_cast_timeout
rpc_poll_timeout
Type:integer
Default:1

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

Deprecated Variations
Group Name
DEFAULT rpc_poll_timeout
zmq_target_expire
Type:integer
Default:300

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

Deprecated Variations
Group Name
DEFAULT zmq_target_expire
zmq_target_update
Type:integer
Default:180

Update period in seconds of a name service record about existing target.

Deprecated Variations
Group Name
DEFAULT zmq_target_update
use_pub_sub
Type:boolean
Default:false

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

Deprecated Variations
Group Name
DEFAULT use_pub_sub
use_router_proxy
Type:boolean
Default:false

Use ROUTER remote proxy.

Deprecated Variations
Group Name
DEFAULT use_router_proxy
use_dynamic_connections
Type:boolean
Default:false

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

zmq_failover_connections
Type:integer
Default:2

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

rpc_zmq_min_port
Type:port number
Default:49153
Minimum Value:0
Maximum Value:65535

Minimal port number for random ports range.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_min_port
rpc_zmq_max_port
Type:integer
Default:65536
Minimum Value:1
Maximum Value:65536

Maximal port number for random ports range.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_max_port
rpc_zmq_bind_port_retries
Type:integer
Default:100

Number of retries to find free port number before fail with ZMQBindError.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_bind_port_retries
rpc_zmq_serialization
Type:string
Default:json
Valid Values:json, msgpack

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

Deprecated Variations
Group Name
DEFAULT rpc_zmq_serialization
zmq_immediate
Type:boolean
Default:true

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_tcp_keepalive
Type:integer
Default:-1

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_idle
Type:integer
Default:-1

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_cnt
Type:integer
Default:-1

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl
Type:integer
Default:-1

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

rpc_thread_pool_size
Type:integer
Default:100

Maximum number of (green) threads to work concurrently.

rpc_message_ttl
Type:integer
Default:300

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_use_acks
Type:boolean
Default:false

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_ack_timeout_base
Type:integer
Default:15

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier
Type:integer
Default:2

Number to multiply base ack timeout by after each retry attempt.

rpc_retry_attempts
Type:integer
Default:3

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

subscribe_on
Type:list
Default:

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

executor_thread_pool_size
Type:integer
Default:64

Size of executor thread pool when executor is threading or eventlet.

Deprecated Variations
Group Name
DEFAULT rpc_thread_pool_size
rpc_response_timeout
Type:integer
Default:60

Seconds to wait for a response from a call.

transport_url
Type:string
Default:<None>

A URL representing the messaging driver to use and its full configuration.

rpc_backend
Type:string
Default:rabbit

The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
control_exchange
Type:string
Default:openstack

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

debug
Type:boolean
Default:false
Mutable:This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append
Type:string
Default:<None>
Mutable:This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, logging_context_format_string).

Deprecated Variations
Group Name
DEFAULT log-config
DEFAULT log_config
log_date_format
Type:string
Default:%Y-%m-%d %H:%M:%S

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file
Type:string
Default:<None>

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations
Group Name
DEFAULT logfile
log_dir
Type:string
Default:<None>

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations
Group Name
DEFAULT logdir
watch_log_file
Type:boolean
Default:false

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

use_syslog
Type:boolean
Default:false

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal
Type:boolean
Default:false

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility
Type:string
Default:LOG_USER

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_stderr
Type:boolean
Default:false

Log output to standard error. This option is ignored if log_config_append is set.

logging_context_format_string
Type:string
Default:%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

Format string to use for log messages with context.

logging_default_format_string
Type:string
Default:%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

Format string to use for log messages when context is undefined.

logging_debug_format_suffix
Type:string
Default:%(funcName)s %(pathname)s:%(lineno)d

Additional data to append to log message when logging level for the message is DEBUG.

logging_exception_prefix
Type:string
Default:%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

Prefix each line of exception output with this format.

logging_user_identity_format
Type:string
Default:%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

Defines the format string for %(user_identity)s that is used in logging_context_format_string.

default_log_levels
Type:list
Default:amqplib=WARN,qpid.messaging=INFO,stevedore=INFO,eventlet.wsgi.server=WARN,sqlalchemy=WARN,boto=WARN,suds=INFO,keystonemiddleware=WARN,paramiko=WARN,requests=WARN,iso8601=WARN,oslo_messaging=INFO,neutronclient=INFO

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors
Type:boolean
Default:false

Enables or disables publication of error events.

instance_format
Type:string
Default:"[instance: %(uuid)s] "

The format for an instance that is passed with the log message.

instance_uuid_format
Type:string
Default:"[instance: %(uuid)s] "

The format for an instance UUID that is passed with the log message.

rate_limit_interval
Type:integer
Default:0

Interval, number of seconds, of log rate limiting.

rate_limit_burst
Type:integer
Default:0

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level
Type:string
Default:CRITICAL

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations
Type:boolean
Default:false

Enables or disables fatal status of deprecations.

castellan

barbican_api_endpoint
Type:string
Default:<None>

The endpoint to use for connecting to the barbican api controller. By default, castellan will use the URL from the service catalog.

barbican_api_version
Type:string
Default:v1

Version of the barbican API, for example: “v1”

cinder

api_version
Type:integer
Default:3

Version of the Cinder API to use.

Deprecated Variations
Group Name
cinder cinder_api_version
api_insecure
Type:boolean
Default:false

Allow to perform insecure SSL requests to cinder.

ca_file
Type:string
Default:<None>

Location of ca certificates file to use for cinder client requests.

endpoint_type
Type:string
Default:internalURL

Endpoint type for cinder client requests

conductor

use_local
Type:boolean
Default:true

Perform sahara-conductor operations locally.

cors

allowed_origin
Type:list
Default:<None>

Indicate whether this resource may be shared with the domain received in the requests “origin” header. Format: “<protocol>://<host>[:<port>]”, no trailing slash. Example: https://horizon.example.com

allow_credentials
Type:boolean
Default:true

Indicate that the actual request can include user credentials

expose_headers
Type:list
Default:X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID

Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.

max_age
Type:integer
Default:3600

Maximum cache age of CORS preflight requests.

allow_methods
Type:list
Default:GET,PUT,POST,DELETE,PATCH

Indicate which methods can be used during the actual request.

allow_headers
Type:list
Default:X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID

Indicate which header field names may be used during the actual request.

database

sqlite_synchronous
Type:boolean
Default:true

If True, SQLite uses synchronous mode.

Deprecated Variations
Group Name
DEFAULT sqlite_synchronous
backend
Type:string
Default:sqlalchemy

The back end to use for the database.

Deprecated Variations
Group Name
DEFAULT db_backend
connection
Type:string
Default:<None>

The SQLAlchemy connection string to use to connect to the database.

Deprecated Variations
Group Name
DEFAULT sql_connection
DATABASE sql_connection
sql connection
slave_connection
Type:string
Default:<None>

The SQLAlchemy connection string to use to connect to the slave database.

mysql_sql_mode
Type:string
Default:TRADITIONAL

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

mysql_enable_ndb
Type:boolean
Default:false

If True, transparently enables support for handling MySQL Cluster (NDB).

idle_timeout
Type:integer
Default:3600

Timeout before idle SQL connections are reaped.

Deprecated Variations
Group Name
DEFAULT sql_idle_timeout
DATABASE sql_idle_timeout
sql idle_timeout
min_pool_size
Type:integer
Default:1

Minimum number of SQL connections to keep open in a pool.

Deprecated Variations
Group Name
DEFAULT sql_min_pool_size
DATABASE sql_min_pool_size
max_pool_size
Type:integer
Default:5

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

Deprecated Variations
Group Name
DEFAULT sql_max_pool_size
DATABASE sql_max_pool_size
max_retries
Type:integer
Default:10

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

Deprecated Variations
Group Name
DEFAULT sql_max_retries
DATABASE sql_max_retries
retry_interval
Type:integer
Default:10

Interval between retries of opening a SQL connection.

Deprecated Variations
Group Name
DEFAULT sql_retry_interval
DATABASE reconnect_interval
max_overflow
Type:integer
Default:50

If set, use this value for max_overflow with SQLAlchemy.

Deprecated Variations
Group Name
DEFAULT sql_max_overflow
DATABASE sqlalchemy_max_overflow
connection_debug
Type:integer
Default:0
Minimum Value:0
Maximum Value:100

Verbosity of SQL debugging information: 0=None, 100=Everything.

Deprecated Variations
Group Name
DEFAULT sql_connection_debug
connection_trace
Type:boolean
Default:false

Add Python stack traces to SQL as comment strings.

Deprecated Variations
Group Name
DEFAULT sql_connection_trace
pool_timeout
Type:integer
Default:<None>

If set, use this value for pool_timeout with SQLAlchemy.

Deprecated Variations
Group Name
DATABASE sqlalchemy_pool_timeout
use_db_reconnect
Type:boolean
Default:false

Enable the experimental use of database reconnect on connection lost.

db_retry_interval
Type:integer
Default:1

Seconds between retries of a database transaction.

db_inc_retry_interval
Type:boolean
Default:true

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retry_interval
Type:integer
Default:10

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_max_retries
Type:integer
Default:20

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

heat

api_insecure
Type:boolean
Default:false

Allow to perform insecure SSL requests to heat.

ca_file
Type:string
Default:<None>

Location of ca certificates file to use for heat client requests.

endpoint_type
Type:string
Default:internalURL

Endpoint type for heat client requests

keystone

api_insecure
Type:boolean
Default:false

Allow to perform insecure SSL requests to keystone.

ca_file
Type:string
Default:<None>

Location of ca certificates file to use for keystone client requests.

endpoint_type
Type:string
Default:internalURL

Endpoint type for keystone client requests

keystone_authtoken

auth_uri
Type:string
Default:<None>

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.

auth_version
Type:string
Default:<None>

API version of the admin Identity API endpoint.

delay_auth_decision
Type:boolean
Default:false

Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.

http_connect_timeout
Type:integer
Default:<None>

Request timeout value for communicating with Identity API server.

http_request_max_retries
Type:integer
Default:3

How many times are we trying to reconnect when communicating with Identity API Server.

cache
Type:string
Default:<None>

Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the memcached_servers option instead.

certfile
Type:string
Default:<None>

Required if identity server requires client certificate

keyfile
Type:string
Default:<None>

Required if identity server requires client certificate

cafile
Type:string
Default:<None>

A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.

insecure
Type:boolean
Default:false

Verify HTTPS connections.

region_name
Type:string
Default:<None>

The region in which the identity server can be found.

signing_dir
Type:string
Default:<None>

Directory used to cache files related to PKI tokens. This option has been deprecated in the Ocata release and will be removed in the P release.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:PKI token format is no longer supported.
memcached_servers
Type:list
Default:<None>

Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.

Deprecated Variations
Group Name
keystone_authtoken memcache_servers
token_cache_time
Type:integer
Default:300

In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.

revocation_cache_time
Type:integer
Default:10

Determines the frequency at which the list of revoked tokens is retrieved from the Identity service (in seconds). A high number of revocation events combined with a low cache duration may significantly reduce performance. Only valid for PKI tokens. This option has been deprecated in the Ocata release and will be removed in the P release.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:PKI token format is no longer supported.
memcache_security_strategy
Type:string
Default:None
Valid Values:None, MAC, ENCRYPT

(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.

memcache_secret_key
Type:string
Default:<None>

(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.

memcache_pool_dead_retry
Type:integer
Default:300

(Optional) Number of seconds memcached server is considered dead before it is tried again.

memcache_pool_maxsize
Type:integer
Default:10

(Optional) Maximum total number of open connections to every memcached server.

memcache_pool_socket_timeout
Type:integer
Default:3

(Optional) Socket timeout in seconds for communicating with a memcached server.

memcache_pool_unused_timeout
Type:integer
Default:60

(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.

memcache_pool_conn_get_timeout
Type:integer
Default:10

(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.

memcache_use_advanced_pool
Type:boolean
Default:false

(Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.

include_service_catalog
Type:boolean
Default:true

(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.

enforce_token_bind
Type:string
Default:permissive

Used to control the use and type of token binding. Can be set to: “disabled” to not check token binding. “permissive” (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. “strict” like “permissive” but if the bind type is unknown the token will be rejected. “required” any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.

check_revocations_for_cached
Type:boolean
Default:false

If true, the revocation list will be checked for cached tokens. This requires that PKI tokens are configured on the identity server.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:PKI token format is no longer supported.
hash_algorithms
Type:list
Default:md5

Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those supported by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one first for performance. The result of the first hash will be stored in the cache. This will typically be set to multiple values only while migrating from a less secure algorithm to a more secure one. Once all the old tokens are expired this option should be set to a single value for better performance.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:PKI token format is no longer supported.
service_token_roles
Type:list
Default:service

A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.

service_token_roles_required
Type:boolean
Default:false

For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.

auth_admin_prefix
Type:string
Default:

Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.

auth_host
Type:string
Default:127.0.0.1

Host providing the admin Identity API endpoint. Deprecated, use identity_uri.

auth_port
Type:integer
Default:35357

Port of the admin Identity API endpoint. Deprecated, use identity_uri.

auth_protocol
Type:string
Default:https
Valid Values:http, https

Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.

identity_uri
Type:string
Default:<None>

Complete admin Identity API endpoint. This should specify the unversioned root endpoint e.g. https://localhost:35357/

admin_token
Type:string
Default:<None>

This option is deprecated and may be removed in a future release. Single shared secret with the Keystone configuration used for bootstrapping a Keystone installation, or otherwise bypassing the normal authentication process. This option should not be used, use admin_user and admin_password instead.

admin_user
Type:string
Default:<None>

Service username.

admin_password
Type:string
Default:<None>

Service user password.

admin_tenant_name
Type:string
Default:admin

Service tenant name.

auth_type
Type:unknown type
Default:<None>

Authentication type to load

Deprecated Variations
Group Name
keystone_authtoken auth_plugin
auth_section
Type:unknown type
Default:<None>

Config Section from which to load plugin specific options

matchmaker_redis

host
Type:string
Default:127.0.0.1

Host to locate redis.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
port
Type:port number
Default:6379
Minimum Value:0
Maximum Value:65535

Use this port to connect to redis host.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
password
Type:string
Default:

Password for Redis server (optional).

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
sentinel_hosts
Type:list
Default:

List of Redis Sentinel hosts (fault tolerance mode), e.g., [host:port, host1:port ... ]

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
sentinel_group_name
Type:string
Default:oslo-messaging-zeromq

Redis replica set name.

wait_timeout
Type:integer
Default:2000

Time in ms to wait between connection attempts.

check_timeout
Type:integer
Default:20000

Time in ms to wait before the transaction is killed.

socket_timeout
Type:integer
Default:10000

Timeout in ms on blocking socket operations.

neutron

api_insecure
Type:boolean
Default:false

Allow to perform insecure SSL requests to neutron.

ca_file
Type:string
Default:<None>

Location of ca certificates file to use for neutron client requests.

endpoint_type
Type:string
Default:internalURL

Endpoint type for neutron client requests

nova

api_insecure
Type:boolean
Default:false

Allow to perform insecure SSL requests to nova.

ca_file
Type:string
Default:<None>

Location of ca certificates file to use for nova client requests.

endpoint_type
Type:string
Default:internalURL

Endpoint type for nova client requests

object_store_access

public_identity_ca_file
Type:string
Default:<None>

Location of ca certificate file to use for identity client requests via public endpoint

public_object_store_ca_file
Type:string
Default:<None>

Location of ca certificate file to use for object-store client requests via public endpoint

oslo_concurrency

disable_process_locking
Type:boolean
Default:false

Enables or disables inter-process locks.

Deprecated Variations
Group Name
DEFAULT disable_process_locking
lock_path
Type:string
Default:/tmp

Directory to use for lock files. For security, the specified directory should only be writable by the user running the processes that need locking. Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set in the environment, use the Python tempfile.gettempdir function to find a suitable location. If external locks are used, a lock path must be set.

Deprecated Variations
Group Name
DEFAULT lock_path

oslo_messaging_amqp

container_name
Type:string
Default:<None>

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

Deprecated Variations
Group Name
amqp1 container_name
idle_timeout
Type:integer
Default:0

Timeout for inactive connections (in seconds)

Deprecated Variations
Group Name
amqp1 idle_timeout
trace
Type:boolean
Default:false

Debug: dump AMQP frames to stdout

Deprecated Variations
Group Name
amqp1 trace
ssl
Type:boolean
Default:false

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

ssl_ca_file
Type:string
Default:

CA certificate PEM file used to verify the server’s certificate

Deprecated Variations
Group Name
amqp1 ssl_ca_file
ssl_cert_file
Type:string
Default:

Self-identifying certificate PEM file for client authentication

Deprecated Variations
Group Name
amqp1 ssl_cert_file
ssl_key_file
Type:string
Default:

Private key PEM file used to sign ssl_cert_file certificate (optional)

Deprecated Variations
Group Name
amqp1 ssl_key_file
ssl_key_password
Type:string
Default:<None>

Password for decrypting ssl_key_file (if encrypted)

Deprecated Variations
Group Name
amqp1 ssl_key_password
allow_insecure_clients
Type:boolean
Default:false

Accept clients using either SSL or plain TCP

Deprecated Variations
Group Name
amqp1 allow_insecure_clients

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Not applicable - not a SSL server
sasl_mechanisms
Type:string
Default:

Space separated list of acceptable SASL mechanisms

Deprecated Variations
Group Name
amqp1 sasl_mechanisms
sasl_config_dir
Type:string
Default:

Path to directory that contains the SASL configuration

Deprecated Variations
Group Name
amqp1 sasl_config_dir
sasl_config_name
Type:string
Default:

Name of configuration file (without .conf suffix)

Deprecated Variations
Group Name
amqp1 sasl_config_name
sasl_default_realm
Type:string
Default:

SASL realm to use if no realm present in username

username
Type:string
Default:

User name for message broker authentication

Deprecated Variations
Group Name
amqp1 username

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Should use configuration option transport_url to provide the username.
password
Type:string
Default:

Password for message broker authentication

Deprecated Variations
Group Name
amqp1 password

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Should use configuration option transport_url to provide the password.
connection_retry_interval
Type:integer
Default:1
Minimum Value:1

Seconds to pause before attempting to re-connect.

connection_retry_backoff
Type:integer
Default:2
Minimum Value:0

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval_max
Type:integer
Default:30
Minimum Value:1

Maximum limit for connection_retry_interval + connection_retry_backoff

Type:integer
Default:10
Minimum Value:1

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

default_reply_retry
Type:integer
Default:0
Minimum Value:-1

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout
Type:integer
Default:30
Minimum Value:5

The deadline for an rpc reply message delivery.

default_send_timeout
Type:integer
Default:30
Minimum Value:5

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_notify_timeout
Type:integer
Default:30
Minimum Value:5

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

Type:integer
Default:600
Minimum Value:1

The duration to schedule a purge of idle sender links. Detach link after expiry.

addressing_mode
Type:string
Default:dynamic

Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing

server_request_prefix
Type:string
Default:exclusive

address prefix used when sending to a specific server

Deprecated Variations
Group Name
amqp1 server_request_prefix
broadcast_prefix
Type:string
Default:broadcast

address prefix used when broadcasting to all servers

Deprecated Variations
Group Name
amqp1 broadcast_prefix
group_request_prefix
Type:string
Default:unicast

address prefix when sending to any server in group

Deprecated Variations
Group Name
amqp1 group_request_prefix
rpc_address_prefix
Type:string
Default:openstack.org/om/rpc

Address prefix for all generated RPC addresses

notify_address_prefix
Type:string
Default:openstack.org/om/notify

Address prefix for all generated Notification addresses

multicast_address
Type:string
Default:multicast

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

unicast_address
Type:string
Default:unicast

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

anycast_address
Type:string
Default:anycast

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

default_notification_exchange
Type:string
Default:<None>

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’

default_rpc_exchange
Type:string
Default:<None>

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’

Type:integer
Default:200
Minimum Value:1

Window size for incoming RPC Reply messages.

rpc_server_credit
Type:integer
Default:100
Minimum Value:1

Window size for incoming RPC Request messages

notify_server_credit
Type:integer
Default:100
Minimum Value:1

Window size for incoming Notification messages

pre_settled
Type:multi-valued
Default:rpc-cast
Default:rpc-reply

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled

oslo_messaging_kafka

kafka_default_host
Type:string
Default:localhost

Default Kafka broker Host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
kafka_default_port
Type:port number
Default:9092
Minimum Value:0
Maximum Value:65535

Default Kafka broker Port

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
kafka_max_fetch_bytes
Type:integer
Default:1048576

Max fetch bytes of Kafka consumer

kafka_consumer_timeout
Type:floating point
Default:1.0

Default timeout(s) for Kafka consumers

pool_size
Type:integer
Default:10

Pool Size for Kafka Consumers

conn_pool_min_size
Type:integer
Default:2

The pool size limit for connections expiration policy

conn_pool_ttl
Type:integer
Default:1200

The time-to-live in sec of idle connections in the pool

consumer_group
Type:string
Default:oslo_messaging_consumer

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

producer_batch_timeout
Type:floating point
Default:0.0

Upper bound on the delay for KafkaProducer batching in seconds

producer_batch_size
Type:integer
Default:16384

Size of batch for the producer async send

oslo_messaging_notifications

level
Type:string
Default:INFO

Notification level for outgoing notifications

Deprecated Variations
Group Name
DEFAULT notification_level
publisher_id
Type:string
Default:<None>

Identifier of the publisher

Deprecated Variations
Group Name
DEFAULT notification_publisher_id
driver
Type:multi-valued
Default:

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

Deprecated Variations
Group Name
DEFAULT notification_driver
transport_url
Type:string
Default:<None>

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

Deprecated Variations
Group Name
DEFAULT notification_transport_url
topics
Type:list
Default:notifications

AMQP topic used for OpenStack notifications.

Deprecated Variations
Group Name
rpc_notifier2 topics
DEFAULT notification_topics
retry
Type:integer
Default:-1

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

oslo_messaging_rabbit

amqp_durable_queues
Type:boolean
Default:false

Use durable queues in AMQP.

Deprecated Variations
Group Name
DEFAULT amqp_durable_queues
DEFAULT rabbit_durable_queues
amqp_auto_delete
Type:boolean
Default:false

Auto-delete queues in AMQP.

Deprecated Variations
Group Name
DEFAULT amqp_auto_delete
ssl
Type:boolean
Default:<None>

Enable SSL

ssl_version
Type:string
Default:

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_version
ssl_key_file
Type:string
Default:

SSL key file (valid only if SSL enabled).

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_keyfile
ssl_cert_file
Type:string
Default:

SSL cert file (valid only if SSL enabled).

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_certfile
ssl_ca_file
Type:string
Default:

SSL certification authority file (valid only if SSL enabled).

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_ssl_ca_certs
kombu_reconnect_delay
Type:floating point
Default:1.0

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

Deprecated Variations
Group Name
DEFAULT kombu_reconnect_delay
kombu_compression
Type:string
Default:<None>

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_missing_consumer_retry_timeout
Type:integer
Default:60

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

Deprecated Variations
Group Name
oslo_messaging_rabbit kombu_reconnect_timeout
kombu_failover_strategy
Type:string
Default:round-robin
Valid Values:round-robin, shuffle

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

rabbit_host
Type:string
Default:localhost

The RabbitMQ broker address where a single node is used.

Deprecated Variations
Group Name
DEFAULT rabbit_host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_port
Type:port number
Default:5672
Minimum Value:0
Maximum Value:65535

The RabbitMQ broker port where a single node is used.

Deprecated Variations
Group Name
DEFAULT rabbit_port

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_hosts
Type:list
Default:$rabbit_host:$rabbit_port

RabbitMQ HA cluster host:port pairs.

Deprecated Variations
Group Name
DEFAULT rabbit_hosts

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_userid
Type:string
Default:guest

The RabbitMQ userid.

Deprecated Variations
Group Name
DEFAULT rabbit_userid

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_password
Type:string
Default:guest

The RabbitMQ password.

Deprecated Variations
Group Name
DEFAULT rabbit_password

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_login_method
Type:string
Default:AMQPLAIN
Valid Values:PLAIN, AMQPLAIN, RABBIT-CR-DEMO

The RabbitMQ login method.

Deprecated Variations
Group Name
DEFAULT rabbit_login_method
rabbit_virtual_host
Type:string
Default:/

The RabbitMQ virtual host.

Deprecated Variations
Group Name
DEFAULT rabbit_virtual_host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:Replaced by [DEFAULT]/transport_url
rabbit_retry_interval
Type:integer
Default:1

How frequently to retry connecting with RabbitMQ.

rabbit_retry_backoff
Type:integer
Default:2

How long to backoff for between retries when connecting to RabbitMQ.

Deprecated Variations
Group Name
DEFAULT rabbit_retry_backoff
rabbit_interval_max
Type:integer
Default:30

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_max_retries
Type:integer
Default:0

Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count).

Deprecated Variations
Group Name
DEFAULT rabbit_max_retries

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

rabbit_ha_queues
Type:boolean
Default:false

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “

Deprecated Variations
Group Name
DEFAULT rabbit_ha_queues
rabbit_transient_queues_ttl
Type:integer
Default:1800
Minimum Value:1

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_qos_prefetch_count
Type:integer
Default:0

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

heartbeat_timeout_threshold
Type:integer
Default:60

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disable the heartbeat). EXPERIMENTAL

heartbeat_rate
Type:integer
Default:2

How often times during the heartbeat_timeout_threshold we check the heartbeat.

fake_rabbit
Type:boolean
Default:false

Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake

Deprecated Variations
Group Name
DEFAULT fake_rabbit
channel_max
Type:integer
Default:<None>

Maximum number of channels to allow

frame_max
Type:integer
Default:<None>

The maximum byte size for an AMQP frame

heartbeat_interval
Type:integer
Default:3

How often to send heartbeats for consumer’s connections

ssl_options
Type:dict
Default:<None>

Arguments passed to ssl.wrap_socket

socket_timeout
Type:floating point
Default:0.25

Set socket timeout in seconds for connection’s socket

tcp_user_timeout
Type:floating point
Default:0.25

Set TCP_USER_TIMEOUT in seconds for connection’s socket

host_connection_reconnect_delay
Type:floating point
Default:0.25

Set delay for reconnection to some host which has connection error

connection_factory
Type:string
Default:single
Valid Values:new, single, read_write

Connection factory implementation

pool_max_size
Type:integer
Default:30

Maximum number of connections to keep queued.

pool_max_overflow
Type:integer
Default:0

Maximum number of connections to create above pool_max_size.

pool_timeout
Type:integer
Default:30

Default number of seconds to wait for a connections to available

pool_recycle
Type:integer
Default:600

Lifetime of a connection (since creation) in seconds or None for no recycling. Expired connections are closed on acquire.

pool_stale
Type:integer
Default:60

Threshold at which inactive (since release) connections are considered stale in seconds or None for no staleness. Stale connections are closed on acquire.

default_serializer_type
Type:string
Default:json
Valid Values:json, msgpack

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

notification_persistence
Type:boolean
Default:false

Persist notification messages.

default_notification_exchange
Type:string
Default:${control_exchange}_notification

Exchange name for sending notifications

notification_listener_prefetch_count
Type:integer
Default:100

Max number of not acknowledged message which RabbitMQ can send to notification listener.

default_notification_retry_attempts
Type:integer
Default:-1

Reconnecting retry count in case of connectivity problem during sending notification, -1 means infinite retry.

notification_retry_delay
Type:floating point
Default:0.25

Reconnecting retry delay in case of connectivity problem during sending notification message

rpc_queue_expiration
Type:integer
Default:60

Time to live for rpc queues without consumers in seconds.

default_rpc_exchange
Type:string
Default:${control_exchange}_rpc

Exchange name for sending RPC messages

rpc_reply_exchange
Type:string
Default:${control_exchange}_rpc_reply

Exchange name for receiving RPC replies

rpc_listener_prefetch_count
Type:integer
Default:100

Max number of not acknowledged message which RabbitMQ can send to rpc listener.

rpc_reply_listener_prefetch_count
Type:integer
Default:100

Max number of not acknowledged message which RabbitMQ can send to rpc reply listener.

rpc_reply_retry_attempts
Type:integer
Default:-1

Reconnecting retry count in case of connectivity problem during sending reply. -1 means infinite retry during rpc_timeout

rpc_reply_retry_delay
Type:floating point
Default:0.25

Reconnecting retry delay in case of connectivity problem during sending reply.

default_rpc_retry_attempts
Type:integer
Default:-1

Reconnecting retry count in case of connectivity problem during sending RPC message, -1 means infinite retry. If actual retry attempts in not 0 the rpc request could be processed more than one time

rpc_retry_delay
Type:floating point
Default:0.25

Reconnecting retry delay in case of connectivity problem during sending RPC message

oslo_messaging_zmq

rpc_zmq_bind_address
Type:string
Default:*

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The “host” option should point or resolve to this address.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_bind_address
rpc_zmq_matchmaker
Type:string
Default:redis
Valid Values:redis, sentinel, dummy

MatchMaker driver.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_matchmaker
rpc_zmq_contexts
Type:integer
Default:1

Number of ZeroMQ contexts, defaults to 1.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_contexts
rpc_zmq_topic_backlog
Type:integer
Default:<None>

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_topic_backlog
rpc_zmq_ipc_dir
Type:string
Default:/var/run/openstack

Directory for holding IPC sockets.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_ipc_dir
rpc_zmq_host
Type:string
Default:localhost

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match “host” option, if running Nova.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_host
zmq_linger
Type:integer
Default:-1

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

Deprecated Variations
Group Name
DEFAULT rpc_cast_timeout
rpc_poll_timeout
Type:integer
Default:1

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

Deprecated Variations
Group Name
DEFAULT rpc_poll_timeout
zmq_target_expire
Type:integer
Default:300

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

Deprecated Variations
Group Name
DEFAULT zmq_target_expire
zmq_target_update
Type:integer
Default:180

Update period in seconds of a name service record about existing target.

Deprecated Variations
Group Name
DEFAULT zmq_target_update
use_pub_sub
Type:boolean
Default:false

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

Deprecated Variations
Group Name
DEFAULT use_pub_sub
use_router_proxy
Type:boolean
Default:false

Use ROUTER remote proxy.

Deprecated Variations
Group Name
DEFAULT use_router_proxy
use_dynamic_connections
Type:boolean
Default:false

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

zmq_failover_connections
Type:integer
Default:2

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

rpc_zmq_min_port
Type:port number
Default:49153
Minimum Value:0
Maximum Value:65535

Minimal port number for random ports range.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_min_port
rpc_zmq_max_port
Type:integer
Default:65536
Minimum Value:1
Maximum Value:65536

Maximal port number for random ports range.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_max_port
rpc_zmq_bind_port_retries
Type:integer
Default:100

Number of retries to find free port number before fail with ZMQBindError.

Deprecated Variations
Group Name
DEFAULT rpc_zmq_bind_port_retries
rpc_zmq_serialization
Type:string
Default:json
Valid Values:json, msgpack

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

Deprecated Variations
Group Name
DEFAULT rpc_zmq_serialization
zmq_immediate
Type:boolean
Default:true

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_tcp_keepalive
Type:integer
Default:-1

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_idle
Type:integer
Default:-1

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_cnt
Type:integer
Default:-1

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl
Type:integer
Default:-1

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

rpc_thread_pool_size
Type:integer
Default:100

Maximum number of (green) threads to work concurrently.

rpc_message_ttl
Type:integer
Default:300

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_use_acks
Type:boolean
Default:false

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_ack_timeout_base
Type:integer
Default:15

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier
Type:integer
Default:2

Number to multiply base ack timeout by after each retry attempt.

rpc_retry_attempts
Type:integer
Default:3

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

subscribe_on
Type:list
Default:

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

oslo_middleware

enable_proxy_headers_parsing
Type:boolean
Default:false

Whether the application is behind a proxy or not. This determines if the middleware should parse the headers or not.

oslo_policy

policy_file
Type:string
Default:policy.json

The file that defines policies.

Deprecated Variations
Group Name
DEFAULT policy_file
policy_default_rule
Type:string
Default:default

Default rule. Enforced when a requested rule is not found.

Deprecated Variations
Group Name
DEFAULT policy_default_rule
policy_dirs
Type:multi-valued
Default:policy.d

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

Deprecated Variations
Group Name
DEFAULT policy_dirs

retries

retries_number
Type:integer
Default:5

Number of times to retry the request to client before failing

retry_after
Type:integer
Default:10

Time between the retries to client (in seconds).

ssl

ca_file
Type:string
Default:<None>

CA certificate file to use to verify connecting clients.

Deprecated Variations
Group Name
DEFAULT ssl_ca_file
cert_file
Type:string
Default:<None>

Certificate file to use when starting the server securely.

Deprecated Variations
Group Name
DEFAULT ssl_cert_file
key_file
Type:string
Default:<None>

Private key file to use when starting the server securely.

Deprecated Variations
Group Name
DEFAULT ssl_key_file
version
Type:string
Default:<None>

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

ciphers
Type:string
Default:<None>

Sets the list of available ciphers. value should be a string in the OpenSSL cipher list format.

swift

api_insecure
Type:boolean
Default:false

Allow to perform insecure SSL requests to swift.

ca_file
Type:string
Default:<None>

Location of ca certificates file to use for swift client requests.

endpoint_type
Type:string
Default:internalURL

Endpoint type for swift client requests

timeouts

ips_assign_timeout
Type:integer
Default:10800

Assign IPs timeout, in seconds

wait_until_accessible
Type:integer
Default:10800

Wait for instance accessibility, in seconds

delete_instances_timeout
Type:integer
Default:10800

Wait for instances to be deleted, in seconds

detach_volume_timeout
Type:integer
Default:300

Timeout for detaching volumes from instance, in seconds